Categories : GARDEN & FARM , Gardena Water Systems , gardena , Watering ,
Brand : GARDENA
Share
Gardena-Fully Automatic Flower Box Watering
The GARDENA Fully Automatic Flower Box Watering irrigates up to six metres of flower boxes, automatically. With the built-in timer with 13 fixed programmes, your flower boxes can be easily irrigated in your absence. For independence from the tap, the flower box watering can be operated directly from e.g. a rainwater tank. If more than six metres of flower boxes are to be connected, the set can be extended. For water-saving irrigation, the GARDENA Flower Box Watering can be connected to the GARDENA Rain Sensor electronic (Art. No. 1189-20) and the Soil Moisture Sensor (Art. No. 1188-20). Included in the set is a transformer with rotary switch for selecting the watering programme, a14 V low-voltage pump with dirt filter, 25 Inline Drip Heads (2 l/h) with end cap and cleaning needle, 10 m Supply Pipe 4.6 mm (3/16") and 15 Pipe Pegs.
Fully automatic Watering of the flower boxes is regulated by the computer; the water flow is automatically switched on and off. This is convenient and gives you more free time. |
Immediately ready to use Thanks to the comprehensive set, including a pump, it can be put into use right away. |
Requirement based irrigation The selection of 13 watering programmes allows optimal irrigation depending on the plant requirement. |
Independent from the tap The Fully Automatic Flower Box Watering functions independently of a tap, anywhere where there is a water reservoir, e.g. a rainwater tank, and where there is power supply. |
Weather-dependent, water-sparing irrigation If you connect a GARDENA Rain Sensor electronic or a Soil Moisture Sensor to the system, then soil moisture after rain will be considered. If it rains and the plants already have enough moisture, the irrigation is automatically stopped. |
